RFI
[Top] [All Lists]

Re: [RFI] RFI via Florescent Lights

To: "Roger (K8RI)" <k8ri@rogerhalstead.com>
Subject: Re: [RFI] RFI via Florescent Lights
From: Charles Coldwell <coldwell@gmail.com>
Date: Thu, 7 Apr 2016 07:24:51 -0400
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
On Tue, Apr 5, 2016 at 3:17 PM, Roger (K8RI) <k8ri@rogerhalstead.com> wrote:
>
> They've been up there so long I don't remember the ballast specs. They are
> about 2 X 1 X 6 inches and heavy.

Sounds like magnetic ballasts.

I had to replace a bunch of magnetic ballasts in my basement; they
were oozing potting material.  I discovered that many of them contain
PCBs, which has made safe disposal challenging.  The date codes on GE
ballasts will tell you if they contain PCB-insulated capacitors.

http://www.gelighting.com/LightingWeb/na/images/GE-PCB-Containing-Fluorescent-Lamp-Ballasts_tcm201-33708.pdf

-- 
Charles M. Coldwell, W1CMC
Belmont, Massachusetts, New England
"Turn on, log in, tune out"
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>