If you haven't made changes in your shack its unlikely the cause is bonding on
your equipment. However it is likely to have a rectified power line noise
accuring on only the positive half cycle. Can you send me a wave file if your
noise, I'd like to hear and analyze it.
Mike @ RFI Services
( Replying from a mobile device)
Jim Brown <jim@audiosystemsgroup.com> wrote:
>On Sat,3/14/2015 3:19 PM, Kenneth G. Gordon wrote:
>> Today, I connected the audio output of my transceiver, a Yaesu FT-890,
>> set to AM-wide, tuned to 3580 KHz, into my computer and fired up
>> Spectran.
>>
>> Spectran is exhibiting a very wide-band series of peaks in the noise
>> which appear to be multiples of 60 Hz.
>
>You are seeing harmonics of the AC power line. This is an indication of
>improper bonding of your equipment. Study
>http://k9yc.com/GroundingAndAudio.pdf The simple rules are: 1) Get power
>from everything in your station from the same AC outlet, or outlets in
>the same backbox, or from outlets whose Green wires are bonded together;
>2) Bond from chassis to chassis of every piece of equipment that is
>interconnected by short, fat copper; 3) Bond from your TX chassis to all
>the other grounds in your home.
>
>73, Jim K9YC
>_______________________________________________
>RFI mailing list
>RFI@contesting.com
>http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|