The cable tv company came out early on, disconnected it from the street and
nothing changed. So I am assuming they are clear. They were the forst to
respond.
---------- Original Message ----------
From: rfi-request@contesting.com
To: rfi@contesting.com
Subject: RFI Digest, Vol 134, Issue 31
Date: Wed, 26 Mar 2014 14:51:56 -0400
Send RFI mailing list submissions to
rfi@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/rfi
or, via email, send a message with subject or body 'help' to
rfi-request@contesting.com
You can reach the person managing the list at
rfi-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of RFI digest..."
Today's Topics:
1. rfi (w3bj@juno.com)
2. RFI Cable Company Complaints (W6enz@aol.com)
3. Re: rfi (W0MU Mike Fatchett)
4. Re: ARRL to FCC... (Tom Thompson)
5. remove from list (Terry Cellman)
6. Re: ARRL to FCC... (Dale J.)
7. Re: ARRL to FCC... (David Robbins)
----------------------------------------------------------------------
Message: 1
Date: Wed, 26 Mar 2014 16:34:55 GMT
From: "w3bj@juno.com" <w3bj@juno.com>
To: RFI@contesting.com
Subject: [RFI] rfi
Message-ID: <20140326.123455.23722.2@webmail05.dca.untd.com>
Content-Type: text/plain; charset=windows-1252
Does anyone know if its possible fpr DSL or high speed internet to cause my rfi
problem Verizon has never been to check out their lines, I have been
concentrating on power company.
____________________________________________________________
Old School Yearbook Pics
View Class Yearbooks Online Free. Search by School & Year. Look Now!
http://thirdpartyoffers.juno.com/TGL3131/533301de59e891de0d15st01duc
------------------------------
Message: 2
Date: Wed, 26 Mar 2014 12:44:37 -0400 (EDT)
From: W6enz@aol.com
To: RFI@contesting.com
Subject: [RFI] RFI Cable Company Complaints
Message-ID: <1f28b.2d0567b3.40645df5@aol.com>
Content-Type: text/plain; charset="US-ASCII"
FYI, I found this link to the FCC web site regarding the protocol that they
have for resolving any RFI problems associated with your local cable
company;
http://www.fcc.gov/guides/cable-television-where-file-complaints-regarding-c
able-service
Of special significance to me was the following from their web page:
You should contact the FCC if you have complaints or questions about the
following issues:
* Signal leakage from cable systems, which can result in
interference to other users of the spectrum, including aeronautical services.
Contact
1-888-225-5322 or send your inquiry to FCC, Consumer & Governmental
Affairs Bureau, 445 12th Street, S.W., Washington, D.C. 20554.
I hope you find this information to be useful.
73 ... Rick - W6ENZ
------------------------------
Message: 3
Date: Wed, 26 Mar 2014 10:46:05 -0600
From: W0MU Mike Fatchett <w0mu@w0mu.com>
To: rfi@contesting.com
Subject: Re: [RFI] rfi
Message-ID: <5333044D.1030409@w0mu.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I would assume that a cable modem or DSL router could cause noise. Are
you talking about noise on the actual cables? If so I don't think so.
Issues at their boxes where they boost signal levels etc could certainly
be worth investigating.
You need to get a directional noise finder and locate the noise yourself
instead of just calling a bunch of companies and hoping for them to find
something.
Mike W0MU
On 3/26/2014 10:34 AM, w3bj@juno.com wrote:
> Does anyone know if its possible fpr DSL or high speed internet to cause my
> rfi problem Verizon has never been to check out their lines, I have been
> concentrating on power company.
> ____________________________________________________________
> Old School Yearbook Pics
> View Class Yearbooks Online Free. Search by School & Year. Look Now!
> http://thirdpartyoffers.juno.com/TGL3131/533301de59e891de0d15st01duc
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
------------------------------
Message: 4
Date: Wed, 26 Mar 2014 12:18:32 -0600
From: Tom Thompson <tlthompson@qwest.net>
To: "Dale J." <dj2001x@comcast.net>, dave@nk7z.net
Cc: "rfi@contesting.com Reflector" <rfi@contesting.com>
Subject: Re: [RFI] ARRL to FCC...
Message-ID: <533319F8.8050305@qwest.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Dale,
I checked with Costco and they only carry LED back lit TV sets now. In
thinking about it further, I don't think making a measurement on the
power cord with an RF current probe would be too definitive anyway
because of the RFI coming from the other sets connected on the same
circuit. It would be instructive if you could conduct some tests on
your neighbor's set. Would it be possible to use a battery and quiet
inverter to power the set with all other wires disconnected? You might
have to connect the cable to get the screen to light. If you could do
that and it eliminated the RFI then the line filters Ed suggested might
work for you.
Just some thoughts.
Tom W0IVJ
On 3/26/2014 2:23 AM, Dale J. wrote:
> My next door plasma is broadband hash with various bumps along the way. I
> have one of those bumps especially bad at 3.857, it's 20 db over 9 and sounds
> like a motor running but changing speed and sometimes stopping and starting.
> The broadband hash is all over the 80 meter band and 40 too. The upper bands
> are less affected. I suspect part of the noise is from a switching power
> supply in the plasma tv, that might be what that motor sounding noise is not
> sure though. I wish it were my TV, I could then find out more how these
> things tick before permanently disabling it. Makes it difficult on my USAF
> MARS net too.
>
> Dale, k9vuj
>
>
>
> On 25, Mar 2014, at 21:16, David Cole <dave@nk7z.net> wrote:
>
>> Imagine thousands of little lightening bolts... Thats Plasma TV.
>> --
>> Thanks and 73's,
>> For equipment, and software setups and reviews see:
>> www.nk7z.net
>> for MixW support see;
>> http://groups.yahoo.com/neo/groups/mixw/info
>> for Dopplergram information see:
>> http://groups.yahoo.com/neo/groups/dopplergram/info
>> for MM-SSTV see:
>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>>
>>
>> On Tue, 2014-03-25 at 18:28 -0600, Tom Thompson wrote:
>>> Ed,
>>>
>>> I checked out a few plasma tv sets a couple of years ago with a portable
>>> shortwave receiver. The RFI was coming right out of the front of the
>>> set which made sense since that was where the discharge was occurring.
>>>
>>> Tom W0IVJ
>>>
>>> On 3/25/2014 12:31 PM, Hare, Ed W1RFI wrote:
>>>
>>>> Thanks, Dale.
>>>>
>>>> We can then see if the TV is still in production. If it is no longer
>>>> manufacturered, it may be a harmful interference complaint, not a possible
>>>> emissions-limit violation.
>>>>
>>>> The ARRL Lab would also be willing to provide a few filters to try, if
>>>> your neighbor is willing to work with you. Some have speculated that the
>>>> noise comes directly from the TV, and this could be true, but I still tend
>>>> to think in terms of noise coming out the AC mains and possibly also being
>>>> radiated by the shield of the incoming coaxial feed line.
>>>>
>>>> -----Original Message-----
>>>> From: Dale J. [mailto:dj2001x@comcast.net]
>>>> Sent: Tuesday, March 25, 2014 2:29 PM
>>>> To: Hare, Ed W1RFI
>>>> Cc: rfi@contesting.com
>>>> Subject: Re: [RFI] ARRL to FCC...
>>>>
>>>> Ed
>>>>
>>>> I'll see if I can get that information from my neighbor, but it will take
>>>> a while. I have to actually get in the house and look at the back of the
>>>> TV and get the model number because I don't think they know for sure. As
>>>> soon as I get it I'll send you a email.
>>>>
>>>> Tnx
>>>> 73
>>>> Dale, K9VUJ
>>>>
>>>>
>>>> On 25, Mar 2014, at 13:04, "Hare, Ed W1RFI" <w1rfi@arrl.org> wrote:
>>>>
>>>>> If the ARRL Lab can get some reports involving specific model numbers, we
>>>>> can do some testing and find out where these plasma sets stand. I had a
>>>>> report in MD that involved two Samsung plasma TVs. One made very loud
>>>>> radiated noise, while the 2nd model, also a plasma TV, was quiet.
>>>>>
>>>>> I need reports that involve a plasma TV operating in a neighbor's home
>>>>> causing harmful interference. So far, most of the reports have been
>>>>> about the QRZ.com and RFI list discussions, not a specific report.
>>>>>
>>>>> The ARRL Lab can measure conducted noise and radiated noise from devices,
>>>>> but we really need to start with actual, non-general reports.
>>>>>
>>>>> Ed Hare, W1RFI
>>>>> ARRL Lab
>>>>>
>>>>> -----Original Message-----
>>>>> From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of KD7JYK DM09
>>>>> Sent: Friday, March 21, 2014 12:23 AM
>>>>> To: rfi@contesting.com
>>>>> Subject: Re: [RFI] ARRL to FCC...
>>>>>
>>>>> : Now if they would recall all the damn plasma TV's out there doing the
>>>>> same
>>>>> : thing it would really tickle my butt cheeks...but, any such action is
>>>>> : goodness!
>>>>>
>>>>> How mant times have you contacted the FCC regarding the interference to
>>>>> your licensed service?
>>>>>
>>>>> Kurt
>>>>>
>>>>> _______________________________________________
>>>>> RFI mailing list
>>>>> RFI@contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>> _______________________________________________
>>>>> RFI mailing list
>>>>> RFI@contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>> _______________________________________________
>>>> RFI mailing list
>>>> RFI@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>
>>> _______________________________________________
>>> RFI mailing list
>>> RFI@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rfi
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
------------------------------
Message: 5
Date: Wed, 26 Mar 2014 13:25:29 -0500
From: "Terry Cellman" <t.cellman@mchsi.com>
To: <RFI@contesting.com>
Subject: [RFI] remove from list
Message-ID: <7149A58933C54F55A50F55A74B9B6CFC@user423c429897>
Content-Type: text/plain; charset="iso-8859-1"
------------------------------
Message: 6
Date: Wed, 26 Mar 2014 13:44:21 -0500
From: "Dale J." <dj2001x@comcast.net>
To: Tom Thompson <tlthompson@qwest.net>
Cc: "rfi@contesting.com Reflector" <rfi@contesting.com>
Subject: Re: [RFI] ARRL to FCC...
Message-ID: <2C6976FF-BFBF-4D7D-9FF5-C43B61B15FE3@comcast.net>
Content-Type: text/plain; charset=iso-8859-1
Tom,
I'd love to do a lot of stuff with their tv, but it's not my house and I hate
to impose on them. I have to catch the neighbor outside on a weekend and chat
with him a little and maybe something might get going. As you can see I'm a
little squeamish about imposing on other people's home and property. I guess I
wouldn't like it much and therein lies my problem, hi. But I'll work on it.
Maybe by the time I finally can do some real investigation the TV will die.
Dale, k9vuj
On 26, Mar 2014, at 13:18, Tom Thompson <tlthompson@qwest.net> wrote:
> Dale,
>
> I checked with Costco and they only carry LED back lit TV sets now. In
> thinking about it further, I don't think making a measurement on the power
> cord with an RF current probe would be too definitive anyway because of the
> RFI coming from the other sets connected on the same circuit. It would be
> instructive if you could conduct some tests on your neighbor's set. Would it
> be possible to use a battery and quiet inverter to power the set with all
> other wires disconnected? You might have to connect the cable to get the
> screen to light. If you could do that and it eliminated the RFI then the
> line filters Ed suggested might work for you.
>
> Just some thoughts.
>
> Tom W0IVJ
>
> On 3/26/2014 2:23 AM, Dale J. wrote:
>> My next door plasma is broadband hash with various bumps along the way. I
>> have one of those bumps especially bad at 3.857, it's 20 db over 9 and
>> sounds like a motor running but changing speed and sometimes stopping and
>> starting. The broadband hash is all over the 80 meter band and 40 too. The
>> upper bands are less affected. I suspect part of the noise is from a
>> switching power supply in the plasma tv, that might be what that motor
>> sounding noise is not sure though. I wish it were my TV, I could then find
>> out more how these things tick before permanently disabling it. Makes it
>> difficult on my USAF MARS net too.
>>
>> Dale, k9vuj
>>
>>
>>
>> On 25, Mar 2014, at 21:16, David Cole <dave@nk7z.net> wrote:
>>
>>> Imagine thousands of little lightening bolts... Thats Plasma TV.
>>> --
>>> Thanks and 73's,
>>> For equipment, and software setups and reviews see:
>>> www.nk7z.net
>>> for MixW support see;
>>> http://groups.yahoo.com/neo/groups/mixw/info
>>> for Dopplergram information see:
>>> http://groups.yahoo.com/neo/groups/dopplergram/info
>>> for MM-SSTV see:
>>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>>>
>>>
>>> On Tue, 2014-03-25 at 18:28 -0600, Tom Thompson wrote:
>>>> Ed,
>>>>
>>>> I checked out a few plasma tv sets a couple of years ago with a portable
>>>> shortwave receiver. The RFI was coming right out of the front of the
>>>> set which made sense since that was where the discharge was occurring.
>>>>
>>>> Tom W0IVJ
>>>>
>>>> On 3/25/2014 12:31 PM, Hare, Ed W1RFI wrote:
>>>>
>>>>> Thanks, Dale.
>>>>>
>>>>> We can then see if the TV is still in production. If it is no longer
>>>>> manufacturered, it may be a harmful interference complaint, not a
>>>>> possible emissions-limit violation.
>>>>>
>>>>> The ARRL Lab would also be willing to provide a few filters to try, if
>>>>> your neighbor is willing to work with you. Some have speculated that the
>>>>> noise comes directly from the TV, and this could be true, but I still
>>>>> tend to think in terms of noise coming out the AC mains and possibly also
>>>>> being radiated by the shield of the incoming coaxial feed line.
>>>>>
>>>>> -----Original Message-----
>>>>> From: Dale J. [mailto:dj2001x@comcast.net]
>>>>> Sent: Tuesday, March 25, 2014 2:29 PM
>>>>> To: Hare, Ed W1RFI
>>>>> Cc: rfi@contesting.com
>>>>> Subject: Re: [RFI] ARRL to FCC...
>>>>>
>>>>> Ed
>>>>>
>>>>> I'll see if I can get that information from my neighbor, but it will take
>>>>> a while. I have to actually get in the house and look at the back of the
>>>>> TV and get the model number because I don't think they know for sure. As
>>>>> soon as I get it I'll send you a email.
>>>>>
>>>>> Tnx
>>>>> 73
>>>>> Dale, K9VUJ
>>>>>
>>>>>
>>>>> On 25, Mar 2014, at 13:04, "Hare, Ed W1RFI" <w1rfi@arrl.org> wrote:
>>>>>
>>>>>> If the ARRL Lab can get some reports involving specific model numbers,
>>>>>> we can do some testing and find out where these plasma sets stand. I
>>>>>> had a report in MD that involved two Samsung plasma TVs. One made very
>>>>>> loud radiated noise, while the 2nd model, also a plasma TV, was quiet.
>>>>>>
>>>>>> I need reports that involve a plasma TV operating in a neighbor's home
>>>>>> causing harmful interference. So far, most of the reports have been
>>>>>> about the QRZ.com and RFI list discussions, not a specific report.
>>>>>>
>>>>>> The ARRL Lab can measure conducted noise and radiated noise from
>>>>>> devices, but we really need to start with actual, non-general reports.
>>>>>>
>>>>>> Ed Hare, W1RFI
>>>>>> ARRL Lab
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of KD7JYK DM09
>>>>>> Sent: Friday, March 21, 2014 12:23 AM
>>>>>> To: rfi@contesting.com
>>>>>> Subject: Re: [RFI] ARRL to FCC...
>>>>>>
>>>>>> : Now if they would recall all the damn plasma TV's out there doing the
>>>>>> same
>>>>>> : thing it would really tickle my butt cheeks...but, any such action is
>>>>>> : goodness!
>>>>>>
>>>>>> How mant times have you contacted the FCC regarding the interference to
>>>>>> your licensed service?
>>>>>>
>>>>>> Kurt
>>>>>>
>>>>>> _______________________________________________
>>>>>> RFI mailing list
>>>>>> RFI@contesting.com
>>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>>> _______________________________________________
>>>>>> RFI mailing list
>>>>>> RFI@contesting.com
>>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>> _______________________________________________
>>>>> RFI mailing list
>>>>> RFI@contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>>
>>>> _______________________________________________
>>>> RFI mailing list
>>>> RFI@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>> _______________________________________________
>>> RFI mailing list
>>> RFI@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rfi
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>>
>
------------------------------
Message: 7
Date: Wed, 26 Mar 2014 13:51:40 -0500 (CDT)
From: David Robbins <k1ttt@verizon.net>
To: rfi@contesting.com
Subject: Re: [RFI] ARRL to FCC...
Message-ID:
<566080314.1227207.1395859901019.JavaMail.root@vznit170076>
Content-Type: text/plain; charset=UTF-8
how much time and effort have you already spent on this? how much more is it
going to cost to get your antique noise hunting stuff working? you can buy a
brand new 40" LED TV for under $400, why not just tell them you'll trade a
brand new one complete with internet access and all sorts of features for their
antique noisemaker and then run over it with your car!
Mar 26, 2014 02:44:44 PM, dj2001x@comcast.net wrote:
Tom,
I'd love to do a lot of stuff with their tv, but it's not my house and I hate
to impose on them. I have to catch the neighbor outside on a weekend and chat
with him a little and maybe something might get going. As you can see I'm a
little squeamish about imposing on other people's home and property. I guess I
wouldn't like it much and therein lies my problem, hi. But I'll work on it.
Maybe by the time I finally can do some real investigation the TV will die.
Dale, k9vuj
On 26, Mar 2014, at 13:18, Tom Thompson wrote:
> Dale,
>
> I checked with Costco and they only carry LED back lit TV sets now. In
> thinking about it further, I don't think making a measurement on the power
> cord with an RF current probe would be too definitive anyway because of the
> RFI coming from the other sets connected on the same circuit. It would be
> instructive if you could conduct some tests on your neighbor's set. Would it
> be possible to use a battery and quiet inverter to power the set with all
> other wires disconnected? You might have to connect the cable to get the
> screen to light. If you could do that and it eliminated the RFI then the line
> filters Ed suggested might work for you.
>
> Just some thoughts.
>
> Tom W0IVJ
>
> On 3/26/2014 2:23 AM, Dale J. wrote:
>> My next door plasma is broadband hash with various bumps along the way. I
>> have one of those bumps especially bad at 3.857, it's 20 db over 9 and
>> sounds like a motor running but changing speed and sometimes stopping and
>> starting. The broadband hash is all over the 80 meter band and 40 too. The
>> upper bands are less affected. I suspect part of the noise is from a
>> switching power supply in the plasma tv, that might be what that motor
>> sounding noise is not sure though. I wish it were my TV, I could then find
>> out more how these things tick before permanently disabling it. Makes it
>> difficult on my USAF MARS net too.
>>
>> Dale, k9vuj
>>
>>
>>
>> On 25, Mar 2014, at 21:16, David Cole wrote:
>>
>>> Imagine thousands of little lightening bolts... Thats Plasma TV.
>>> --
>>> Thanks and 73's,
>>> For equipment, and software setups and reviews see:
>>> www.nk7z.net
>>> for MixW support see;
>>> http://groups.yahoo.com/neo/groups/mixw/info
>>> for Dopplergram information see:
>>> http://groups.yahoo.com/neo/groups/dopplergram/info
>>> for MM-SSTV see:
>>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>>>
>>>
>>> On Tue, 2014-03-25 at 18:28 -0600, Tom Thompson wrote:
>>>> Ed,
>>>>
>>>> I checked out a few plasma tv sets a couple of years ago with a portable
>>>> shortwave receiver. The RFI was coming right out of the front of the
>>>> set which made sense since that was where the discharge was occurring.
>>>>
>>>> Tom W0IVJ
>>>>
>>>> On 3/25/2014 12:31 PM, Hare, Ed W1RFI wrote:
>>>>
>>>>> Thanks, Dale.
>>>>>
>>>>> We can then see if the TV is still in production. If it is no longer
>>>>> manufacturered, it may be a harmful interference complaint, not a
>>>>> possible emissions-limit violation.
>>>>>
>>>>> The ARRL Lab would also be willing to provide a few filters to try, if
>>>>> your neighbor is willing to work with you. Some have speculated that the
>>>>> noise comes directly from the TV, and this could be true, but I still
>>>>> tend to think in terms of noise coming out the AC mains and possibly also
>>>>> being radiated by the shield of the incoming coaxial feed line.
>>>>>
>>>>> -----Original Message-----
>>>>> From: Dale J. [mailto:dj2001x@comcast.net]
>>>>> Sent: Tuesday, March 25, 2014 2:29 PM
>>>>> To: Hare, Ed W1RFI
>>>>> Cc: rfi@contesting.com
>>>>> Subject: Re: [RFI] ARRL to FCC...
>>>>>
>>>>> Ed
>>>>>
>>>>> I'll see if I can get that information from my neighbor, but it will take
>>>>> a while. I have to actually get in the house and look at the back of the
>>>>> TV and get the model number because I don't think they know for sure. As
>>>>> soon as I get it I'll send you a email.
>>>>>
>>>>> Tnx
>>>>> 73
>>>>> Dale, K9VUJ
>>>>>
>>>>>
>>>>> On 25, Mar 2014, at 13:04, "Hare, Ed W1RFI" wrote:
>>>>>
>>>>>> If the ARRL Lab can get some reports involving specific model numbers,
>>>>>> we can do some testing and find out where these plasma sets stand. I had
>>>>>> a report in MD that involved two Samsung plasma TVs. One made very loud
>>>>>> radiated noise, while the 2nd model, also a plasma TV, was quiet.
>>>>>>
>>>>>> I need reports that involve a plasma TV operating in a neighbor's home
>>>>>> causing harmful interference. So far, most of the reports have been
>>>>>> about the QRZ.com and RFI list discussions, not a specific report.
>>>>>>
>>>>>> The ARRL Lab can measure conducted noise and radiated noise from
>>>>>> devices, but we really need to start with actual, non-general reports.
>>>>>>
>>>>>> Ed Hare, W1RFI
>>>>>> ARRL Lab
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of KD7JYK DM09
>>>>>> Sent: Friday, March 21, 2014 12:23 AM
>>>>>> To: rfi@contesting.com
>>>>>> Subject: Re: [RFI] ARRL to FCC...
>>>>>>
>>>>>> : Now if they would recall all the damn plasma TV's out there doing the
>>>>>> same
>>>>>> : thing it would really tickle my butt cheeks...but, any such action is
>>>>>> : goodness!
>>>>>>
>>>>>> How mant times have you contacted the FCC regarding the interference to
>>>>>> your licensed service?
>>>>>>
>>>>>> Kurt
>>>>>>
>>>>>> _______________________________________________
>>>>>> RFI mailing list
>>>>>> RFI@contesting.com
>>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>>> _______________________________________________
>>>>>> RFI mailing list
>>>>>> RFI@contesting.com
>>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>> _______________________________________________
>>>>> RFI mailing list
>>>>> RFI@contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>>>
>>>> _______________________________________________
>>>> RFI mailing list
>>>> RFI@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>> _______________________________________________
>>> RFI mailing list
>>> RFI@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rfi
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>>
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
------------------------------
Subject: Digest Footer
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
------------------------------
End of RFI Digest, Vol 134, Issue 31
************************************
____________________________________________________________
Old School Yearbook Pics
View Class Yearbooks Online Free. Search by School & Year. Look Now!
http://thirdpartyoffers.juno.com/TGL3131/533369116843969114699st01duc
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|