RFI
[Top] [All Lists]

Re: [RFI] Noise...

To: "rfi@contesting.com Reflector" <rfi@contesting.com>
Subject: Re: [RFI] Noise...
From: "Dale J." <dj2001x@comcast.net>
Date: Fri, 14 Mar 2014 02:55:59 -0500
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
You guys must all live in the boonies.  If I had such a thingie on my car 
driving around residential areas the cops would pull me over for something. It 
would even be worse at night.  They'd have the swat team surround my noise 
locator car.   

The noise hunt has become a hobby in itself.  

I just wish and hope someday the FCC will have the money and manpower to 
properly screen devices BEFORE they are allowed to be placed on shelves for 
consumers to consume.  As it is now we/I have to make a complaint about my 
neighbors TV or dimmer so that <maybe> the government radio gendarmes can come 
out and tell them their TV is illegal and interfering with Mr. K9VUJ's ham 
hobby.  That will go over like a lead balloon.  

Dale, k9vuj


On 13, Mar 2014, at 21:32, KD7JYK DM09 <kd7jyk@earthlink.net> wrote:

> For power line noise detection, I use a Yaesu FT-7900 tuned to 324 MHz with
> a magnetic loop antenna.  Mounted on the car, the lobe is upward and off the
> passenger side in a narrow swath due to other antennas causing it to act as
> a 3-element Yagi.  I can drive down the highway at 85 MPH and positively
> identify arcing poles or associated hardware with 100% certainty, yes, yes,
> no, no, no, yes, yes, yes, et cetera, even 600-900' from the pole, more than
> the space between them.
> 
> Speaking of which, anyone playing with my idea of a half-Yagi on the trunk
> lid of a sedan made of a row of NMO mounted whips?
> 
> This would be comparable to my current installation, but more purpose 
> designed.
> 
> Kurt
> 
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>