RFI
[Top] [All Lists]

Re: [RFI] Power strip filtering & protection

To: rfi@contesting.com
Subject: Re: [RFI] Power strip filtering & protection
From: Aaron Kreider <aaron@campusactivism.org>
Date: Fri, 08 Mar 2013 18:40:45 -0500
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
I'm using two Triplite Isobars - probably somewhat similar to the Belkins (they say 40-80 db).

They filter out some of the RFI hash that I was getting on the AC line, but I don't think they get everything. So I'm also using ferrites. My radio's DC adapter has 20 turns on a 2.4 inch torroid, and then it goes to the Isobar...

Aaron

On 3/7/2013 8:57 PM, qrv@kd4e.com wrote:
Occasionally there is a problem with RFI via house wiring.

I requested info via Walmart a while back re. the Belkin
BE112230-08 SurgeMaster Professional 12-Outlets Surge Protector vs
an Inland12-Outlet 330V SurgeGuard Rotating Surge Protector.
The answer arrived today (2mos, 3weeks later).

"Belkin model is 500V clamping; 3940 joules; 150KHz-100MHz. Attenuation
up to 75 dB."




_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>