RFI
[Top] [All Lists]

Re: [RFI] RFI suppression cores for 147 MHz

To: rfi@contesting.com
Subject: Re: [RFI] RFI suppression cores for 147 MHz
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Fri, 01 Mar 2013 09:02:44 -0800
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
On 2/28/2013 11:20 AM, Jeff Stevens wrote:
Does anyone know what document describes the standards for installing STP?
Like ALL cable shields, it must go straight to the shielding enclosure 
at each end to be effective.  I don't work in the computer networking 
world, but I have seen shielded CAT5/6/7 patch cables. They are 
terminated with connectors that have a metal surround to mate with 
similar female connectors.
It must be remembered that each end of an Ethernet is a potential noise 
source, so shielding and suppression are needed at both ends. Remember 
also that an Ethernet cable can also be carrying RF trash in addition to 
that generated by the Ethernet line driver.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>