RFI
[Top] [All Lists]

[RFI] MFJ's Model 856

To: "rfi@contesting.com" <rfi@contesting.com>
Subject: [RFI] MFJ's Model 856
From: Sam Morgan <k5oai.sam@gmail.com>
Date: Tue, 29 Mar 2011 18:36:01 -0500
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
I do have one of MFJ's Model 856, it operates at 135mhz. I have been able to 
narrow down rfi sources to a specific pole with it. In fact I used it in a one 
block long ally with about 8 poles all giving readings on their lines, and was 
able to not only find THE pole, but also determine that it was the transformer 
on that pole. Another time I was able to determine which house it was coming 
from when standing at the base of a pole that was feeding 6 different houses. I 
also found it could point me in the right direction along a line of widely 
separated poles along a main street.

It works as good as the MODEL M330 Mini RFI Locator 320-340 MHZ unit my power 
company guy uses. However neither his nor mine can tell if the noise we are 
hearing is the one that is causing my hf rfi problem. An ac hum like rfi buzz 
is 
an ac hum like buzz, like comes from dang near all of these poles. Now after 3 
frustrating (to me and them) years of hit and miss unnecessary 'fixes', which 
has the utility company griping about how many multiple thousands of dollars 
they have already spent on my problem(s).

This time, hopefully it will be different, at least I now have them considering 
that the problem may even be, as much as, a mile or more from my qth. Not just 
with in a 1-2 block simi industrial (shopping center) area and the included sub 
station.

This year's chase has been documented on: http://www.k5oai.com/rfi/
warning it's a long (3 page) confusing read. If you skip ahead to page 3, it 
starts showing some hope of being resolved. I have another promise for the 1st 
week of April for the next step by the utility company.

Actually there are also several other intermittent rfi sources that I am 
dealing 
with, but the main one I'm after is the power line one that gives me an S9 to 
S9+ noise floor from 160m through 40m. It then starts to drop on 20m where it 
is 
down to an S6-7, and by 10m it's down to an S3.

I get that one fixed and I will be able to find the others on my own. I know 
one 
is in a nearby house. I call it my summertime noise as it only goes active when 
the temps are in the 80's and up. Then there is the winter time one that I 
believe may turn out to be from a light in one of the near by parking lots.

Are we having fun yet?

GB & 73
K5OAI
Sam Morgan

On 3/29/2011 3:13 PM, Alan Robinson wrote:

 > I have also tried locating with the MFJ Model 852, dipole only, power line
 > noise detector. This has not worked well for me. I would like to try their
 > Model 856 with the built in 3 element beam. Perhaps this would work well to
 > get within a few poles of the source. But I believe you really need to use
 > 440 to 450 MHz to get "the pole".
 >

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>