On Sat, Jan 2, 2010 at 12:44, Dale Svetanoff <svetanoff@earthlink.net> wrote:
> 2. Does the 746 Pro go quiet with the antenna removed? If should, but if
> not, then there may be multiple coupling paths between the PC and rig.
I can still hear it a little, but it's definitely stronger when connected.
> 3. Is the PC a stock commercial item with FCCand CE mark labels, or have
> you (or someone) done "custom mods"?
It's a home-brew, but it's a good Antec case and all the various and
sundry hole-fillers are present. There are no neon lights or bubbler
setups. :-)
746 et al are all connected to the station ground outside the radio
room with decent, if a bit light, copper braid. All wires also come
in through Alpha Delta TransiTraps which are grounded to the same
ground rod.
> BTW: When
> you opened up the case of the PC, does the case have internal metal
> shields? If so, are these intact and making contact as designed? Keep in
Not sure what you mean by internal shields. Empty card slots have
fillers, filler around various ports is in place.
--
Peter Laws | N5UWY | plaws plaws net | Travel by Train!
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|