Low Pass TVI Filters For Sale:
A low pass TVI filter is added to the transmitter (inserted
in the coax line after the transmitter or transceiver) to
reduce harmonic interference.
B & W FL-10/1500 (Formerly known as model 425) low pass filter
B & W TVI filter, 50 ohm. It cuts off just above 10 meters,
and will handle 1500 Watts. SO-239 connector on each
end. This is the latest model B & W filter. It is in very nice
condition; it looks very close to new. With paper work $40.
Bud LF-601 low pass filter
This filter is adjustable for best attenuation in your particular
situation, and also to more closely match your specific impedance.
It cuts off just above 6 meters (if adjusted as such), and will
handle 1500 watts. SO-239 connector on each end.
In extremely nice condition for $35.
Drake TV-3300-LP Low Pass Filter
This is a modern low pass filter to go between your transmitter
and antenna, and has been optimized to have more attenuation
in the 40 MHz region, where many TVs have their IF. It is good
for 1000 Watts "average" according to the manual, and has
over 80 db attenuation at 41 MHz. This one looks great, and
includes the paper work. $30
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|