There were several question regarding loop dimensions so I thought I
would post here. The loop dimensions that I am
using are 8.5 inches by 2.5 inches. The loop is constructed of mini coax
RG-174 with the shield exposed at the handle end of the loop and only
the center conductor attached to the shield at that point. Admittedly,
it is hard to see well and I tried to post a larger image but have not
been successful yet. If I can find a way I will post a larger image and
note it here.
I hope this helps a bit. Best, Chas
--
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|