RFI
[Top] [All Lists]

Re: [RFI] 33cm band - Grace accountability

To: diomar@rmws.net
Subject: Re: [RFI] 33cm band - Grace accountability
From: "Mark Tyler" <k5gq@juno.com>
Date: Thu, 17 Sep 2009 02:31:46 GMT
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
the discussion has answered my questions for this band and application.
Here in the Houston area I know of no 33cm amateur activity.
No hams appear to be affected.

Spread sprecturm is very robust hence should be immune from other users on that 
band. 


I enjoy QRP operation on HF - 
-- I wanted to find out if there were users who would struggle with additional 
noise.

Mark
K5GQ







---------- Original Message ----------
From: J Carvalho <diomar@rmws.net>
To: rfi@contesting.com
Subject: Re: [RFI] 33cm band - Grace accountability
Date: Wed, 16 Sep 2009 21:57:05 -0400

Hello Mark,
What exactly are you concerned about? Someone using an unlicensed band  
for human life-safety equipment or that they're using a piece of  
spectrum that was set aside for unlicensed radio usage?

There are several rf bands that do not require licensing, they are my  
home portable phone(900Mhz), and my networking ISM(2.4Ghz) and UNII- 
based(5.2Ghz) network links.

tnx
--joe
KR6NA

 > From: Mark Tyler <k5gq@juno.com>
 > Date: Wed, Sep 16, 2009 at 5:45 AM
 > To: rfi@contesting.com
 >
 >
 > this device is being used by firefighters.
 > It transmitts a spread sprectrum signal around 909Mhz.
 > It has about 1 mile range.
 > When I go to
 > http://www.graceindustries.com/
 > T pass multichannel monitoring system states no license required.
 >
 > It does not talk about the frequency or what other services that  
are on this band.
 >
 > I do not operate 33cm but do not want to loose it; like we did  
220Mhz.



_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>