Do you really need the distribution amplifier? The TV antenna and
amplifier are both rather broad band, and process your 6M signal along
with the VHF TV signals. Interfering with all channels sounds like an
overload problem, so the simplest solution may be replacing the
distribution amp with a low loss, passive splitter. That reduces the
amount of 6M signal reaching the TV tuner. If you can get good TV
reception without the amplifier, removing it may be the easiest and
least expensive solution.
73,
--Tim (KR0U)
kd4e <doc@kd4e.com>:
>
> I raised my delta loop *from* a feedpoint of 6'
> above the ground *to* 15' and now it is getting
> into the TV (all channels).
>
> The TV antenna is at 30 feet and is about 30'
> from my 6M antenna. (I am running 100W SSB.)
>
> I have disconnected the outside antenna at the
> distribution amp inside the house and used an
> amplified set-top antenna - no interference then.
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|