On Wed, 13 Feb 2008 03:18:35 -0500, N3XX - Tim Heger wrote:
>I would check out the connectors installed on all the cables in the house,
>especially those in the wall behind any wall plate. Many times contractors
>doing cable installations will install the connectors improperly, making no
>shield connection at all. Also be sure to get rid of any twist on or crimp
>on connectors, and replace with snap-n-seal connectors. If using the 6 foot
>jumper cable that came with the VCR to connect it to the TV, get rid of it
>and replace with a good quality cable - those cables are junk.
Yes. This is quite good advice. A major problem with both MATV and CATV
systems is leakage caused by lousy connections.
73,
Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|