My Advice is a little different...
go to this website
http://www.arraysolutions.com/prod_category.htm
You want one single ground system to include your power line
ground, phone line ground, cable tv if you have it plus your
tower and antennas. Interconnections to all these items should
be low inductance cables.. one of the best is 3/4" inside
diameter copper tubing available reasonably due to use in home
air conditioning systems.. it actually has a slightly lower
inductance than 2 inch wide flat strap. You also need protective
devices on each coax and control cable that comes from your
tower to the house. Also protection devices on the power line
and phone and cable tv lines as well...
John k9uwa
> i am planing putting up a new tower and beam. now on my ham station
> equipment what is the best way to ground tuner, radio etc to >my station to
> my ground rod. to avoid ground loops do i use tuner as my central and ground
> all ham gear to my tuner and then to grounding rod outside. th use copper
> strap or braided strap from ham gear to tuner and then to grounding rod
> .thanks. kx3x
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
John Goller, K9UWA & Jean Goller, N9PXF
Antique Radio Restorations
k9uwa@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1-260-637-6426
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|