> [Original Message]
> From: kd4e <kd4e@verizon.net>
> To: <ka5s@earthlink.net>
> Date: 1/6/2006 2:43:52 PM
> Subject: Re: [RFI] EMI & EMC Conducted Noise Meaning?
>
> So I don't want it anywhere near a Ham radio room?
>
> > I means it meets only the ten dB higher RF noise limits for business and
> > industrial use. Residential would be Class B.
> >
> >> EMI & EMC Conducted Noise EN55022 CLASS A 130KHz - 30MHz
That will depend HOW it fails to meet Class B -- and who it affects. It's
not unusual to find switch mode PS's that meet Class B above 500 KHz or 1
Mhz -- and fail it at, say, 100 or 200 KHz and lower. Would it create
harmful interference? A radio might not work well near AC power when it's
plugged in. Have you checked? An AM and SW broadcast portable is good for
this. _Would_ anyone beside yourself be affected?
Cortland
KA5S
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|