I suggest that
1) you give the TV a fighting chance by connecting it to a real antenna,
connecting the antenna via coax and, if required, a proper balun.
2) If the lights dim in your home with key-down of a 100 watt rig, you've got
a serious power problem. I would troubleshoot that first. Look for things
like mis-wired outlets -- neutral and ground reversed, hot and neutral
reversed, etc. If you have dimmed lights, check the wiring at the dimmers.
This may or may not be related to your TVI. I would also hang a good
voltmeter on the AC line at various points, including the outlet where the TV
and blinking lights are plugged in, and look for any significant change in
voltage when you are transmitting.
3) The TV may be poorly shielded and poorly constructed, in which case there
may not be much you can do with it. The barrel of water treatment may be in
order -- fill a barrel with water, put the TV in twice, take it out once.
Jim Brown K9YC
On Tue, 8 Jun 2004 04:52:11 -0700 (PDT), Sean Fleming wrote:
>The tv is a emerson that is about 10 yerars old. When transmitting on 40M
>using a g5rv The brightness on the tv on all channels without cable feed to
>the tv the picture dims and brightens on transmit. This is sort of the same
>affect when sometimes you see a change in the lights when operating CW in my
>house where the lighting dims some. The antennas I have is a tri-band Beam far
>fromt he house has no effect. I have an a-99 vertical that has no effect on
>10-15 Meters, but the g5rv that isabove the second story of my home causes all
>the trouble. this is only on 40M.
>
>Sean
>
>
>
>check out my website @ http://www.k8khz.com
>
>Add me to your instant messenger K8KHZ.
>_______________________________________________
>RFI mailing list
>RFI@contesting.com
>http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|