How does this modem get its power?
>From: "Charles Johnston" <ctj92@cableone.net>
To: <rfi@contesting.com>
>Date: Tue, 27 Nov 2001 12:58:34 -0700
>
>Hello list members,
>
> My DCM-200 (D-Link) usb cable modem will stop working and go
>into a resync cycle if I am on 10m phone with as little as 60w
>out pep. None of the other HF bands affect the modem at all even
>with 800w pep output. I had added a pair of clip on ferrites to
>the modem incoming coax (no help) and also to the usb cable (no
>help). My station has a good earth electrical ground with a
>common tie point which is also tied to the service ac ground.
>As I mentioned this is only on 10m....
>
> I have searched the RFI list archives but did not see anything
>directly related to my situation. Any and all replies are very
>welcomed at this time....
>
>73 / DX
>
>Charles T Johnston
>Prescott, Arizona - U.S.A.
>charles@ab7sl.com
>
>AB7SL - Ham Radio Pages
>Official W9INN Antennas Page
>www.ab7sl.com
|