This is a multi-part message in MIME format.
------=_NextPart_000_003E_01BF31C1.A8C20540
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I've reached the point with neighbors noise where I have to build a =
noise direction finding antenna. The intent is to walk around the local =
area carrying a DR set up to find out from which residence the noise =
that is QRMing me originates. Before I knock on a door I wnat to be =
certain I have the right place so I don't waste a silver bullet. This is =
primarily low band stuff 160 and 80 M. It sounds like one of these new =
SCR controlled lamps that spits out junk several mhZ wide and varing in =
freq peak and intensity. Doesn't show up much on higher frequencies. =
Can someone recommend a DR device that will give me enough ability to =
track down noise? Is a ferrite rod set-up sensitive enough or is a loop =
better for detecting small noises? Pre-amps required? Ideas? Bob
------=_NextPart_000_003E_01BF31C1.A8C20540
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.71.1712.3"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000 size=3D2>I've reached the point with =
neighbors noise=20
where I have to build a noise direction finding antenna. The =
intent is to=20
walk around the local area carrying a DR set up to find out from which =
residence=20
the noise that is QRMing me originates. Before I knock on a door I =
wnat to=20
be certain I have the right place so I don't waste a silver bullet. This =
is=20
primarily low band stuff 160 and 80 M. It sounds like one of these =
new SCR=20
controlled lamps that spits out junk several mhZ wide and varing in freq =
peak=20
and intensity. Doesn't show up much on higher frequencies. Can =
someone=20
recommend a DR device that will give me enough ability to track down=20
noise? Is a ferrite rod set-up sensitive enough or is a loop =
better for=20
detecting small noises? Pre-amps required? Ideas? =20
Bob</FONT></DIV></BODY></HTML>
------=_NextPart_000_003E_01BF31C1.A8C20540--
--
Submissions: rfi@contesting.com
Administrative requests: rfi-REQUEST@contesting.com
WWW: http://www.contesting.com/rfi-faq.html
Questions: owner-rfi@contesting.com
|