It is not normal. I do have trouble with a fast update when I use my
USB-serial converter embedded in my Microkeyer. It takes a long time
(10 min.) If I connect directly to a serial port on my laptop then I
can upgrade in about 1 minute.
Make sure you are using a built-in serial port and not a USB-serial
adapter or any other goofy serial port we hams are sometimes forced to use.
KO1H wrote:
> Hi all, I am attempting to update the firmware on my Orion. I had to connect
> it directly to a serial port. That is ok, But It inidcates 9554 lines of
> code and after about 6 hours it has processed about 2450 lines. Is this
> normal? Computer is a 2.4 ghz P3 running widows xp w/ 1.5 gigs of ram. Is
> it normal to progress this slowly? At the current rate it will finish about
> 6pm tomorrow night. This just doesnt seem right.
>
> Let me know if Im missing something
>
> Thanks all
>
> de John ko1h
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|