did you go into the menu and set your line out level to low? This is what
solved it for me.
On 8/22/06, orion-request@contesting.com <orion-request@contesting.com>
wrote:
>
> Send Orion mailing list submissions to
> orion@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/orion
> or, via email, send a message with subject or body 'help' to
> orion-request@contesting.com
>
> You can reach the person managing the list at
> orion-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Orion digest..."
>
>
> Today's Topics:
>
> 1. FOR SALE: ORION 1 (KF4NI@aol.com)
> 2. Re: Orion II and headphone audio distortion UPDATE & solution
> (dbp@tds.net)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 21 Aug 2006 14:54:50 EDT
> From: KF4NI@aol.com
> Subject: [Orion] FOR SALE: ORION 1
> To: orion@contesting.com, tentec@contesting.com
> Message-ID: <4bb.74cf40c.321b5b7a@aol.com>
> Content-Type: text/plain; charset="US-ASCII"
>
>
> Hi TT patrons,
> I have a beautiful Orion 1 that I am bringing to Shelby NC hamfest on
> Sept.
> 1 to sell for $2500. It has Inrad 2.8 filter and also built in tuner. I
> have
> a new in box 708 mike I will let go with it. also, box and manual. This
> radio
> is like new. No issues at all as they say.
> I am just not into CW anymore and I am also not active on the bands much
> other than 75m. This is just too much radio to sit and ignore. someone
> will
> enjoy using it to its full potential and appreciate what a 'wonderful'
> radio it
> is. The RECIEVE on this radio is simply "AWESOME"!! Look for me under the
> banner --3.915/3.927 GANG on Row B-(Bravo) 8-13 across from camper row in
> the
> field.
> See you all in Shelby.
>
> Ruby Byrd KF4NI
>
> PS:
> Will sell before Shelby if the money arrives at my door and shipping of
> $40
> is added to bill.
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 22 Aug 2006 15:37:21 +0000
> From: <dbp@tds.net>
> Subject: Re: [Orion] Orion II and headphone audio distortion UPDATE &
> solution
> To: <orion@contesting.com>
> Message-ID:
> <20060822153721.HWRQ1142.outaamta02.mail.tds.net@smtp.tds.net>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi-
> A phone call to Paul Clinton at TenTec has helped alot!
> He suggested that I disconnect all of the extra connecting cables like the
> amp relay, the computer interface cable, the remote knob etc. from the rear
> of the ORION II. There was no distortion in my headphone audio. Then I
> reconnected cables one at a time until the audio distorted again.
> BTW I had been using a commercial computer interface with a home brew
> interface cable set with my ORION I with no problems. But with the ORION II,
> specifically the I/O connector cable was the problem. To find which specific
> wire was the culprit I cut one wire at a time from that connector until the
> distortion ceased. When I cut the "Line Out" wire, that stopped the
> distortion. It also ended my ability to copy signals using the computer.
> With some experimentation I found that a 1uF/50V capacitor in series with
> the "Line Out" wire (pin 4 of the I/O connector) cured the problem. I was
> able to get the cap. inside the DIN connector shell, no problem. It works
> now as it should. All's well that end's well.
> 73 de dave K1OPQ
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>
>
> End of Orion Digest, Vol 35, Issue 5
> ************************************
>
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|