Re: [Orion] Orion blanker

["James C. Garland" <4cx250b@muohio.edu>]

Gang,
I chkd out the noise blanker on my Orion I with v.2.054 firmware 
today on impulse noise, and found the software blanker to have a 
slight effect on wider BW (3 kHZ+) settings. Typically, I would have 
to set it to level 8 or 9 to hear any effect at all. On narrower BW 
settings, it had no discernible effect. The HW blanker seemed to work fine.
73,
Jim W8ZR 

_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion