Hi Hank,
Two possibilities,
1) are you on version 1.372 of the firmware? If not try that.
If you can remember the sequence that brought you to the failure that would
help. I've noted that sometimes a particular logging software will poll too
quickly and cause the error, so far I'm ok on DXBASE2005/6 and N1MM
contesting software.
2) you are having a logic board failure, send to TT for repair. Paul
Clinton knows his stuff, trust him.
Best wishes,
rich
K5SF
>From: "Henry Pfizenmayer" <pfizenmayer@worldnet.att.net>
>To: <orion@contesting.com>, <ditsnbits@tentec.com>
>Subject: [Orion] Orion error messages
>Date: Sun, 15 May 2005 20:22:45 -0700
>
>Last night I was chasing interference with the sub receiver - changing BW
>and both receivers audio went totally dead.
>
>Got the following error messages on the screen
>
>DSP BG FAIL 1
>DSP BG FAIL 1
>DSP T/O 0
>
>Anybody got any ideas what this is all about ?
>
>An on/off cycle seems to restore things to normal.
>
>Hank K7HP
>
>
>
>_______________________________________________
>Orion mailing list
>Orion@contesting.com
>http://lists.contesting.com/mailman/listinfo/orion
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|