Hi Dave,
In addition to Carl's info on the data rate for the serial port, have
RTS and DTR set always on then use PTT via CAT for all MixW modes with
my Orion. Works very nicely. Just a couple audio cables and the serial
cable.
73, Tom n4zpt
dbp@tds.net wrote:
Hi-
How can I get the Orion to talk with my registered MixW.
Orion set up:
-PSK works fine, but that just uses the sound card.
-I use RTS set to PTT to switch to TX thru a small relay when using PSK.
-DTR is set "always off".
-The serial port is set to 9600-8-n-1.
-I have tried "CAT" in the software set both checked and unchecked.
-The serial cable for the Orion is straight thru with all nine pins wired.
-MixW is set to TT Orion.
Am I missing a software switch somewhere?
Thanks for the bandwidth.
73 de Dave
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|