HI/LOW filter control is much like VBT or Twin Passband tuning on other brands.
HI cut lowers the upper (relative to mode) edge. LOW cut raises the lower
edge. It is effectively a coordinated combination of BW and PBT in one stroke
which keeps one filter edge in the same spot and slides the other up or down.
I find it quite useful. If you set bandwidth and PBT for normal operation,
then HI/LOW cut operates relative to whatever you have set.
There is a bug in the display of PBT value when using HI/LOW CUT, but T-T is
aware of it.
Grant/NQ5T
> I find myself commenting often to the offenders. FWIW, I do NOT understand
> the
> Hi/Lo filter control - IMHO a front panel control that should be liberated
> for
> better use
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|