did you change the rig spec on the pull down menu?
K4OJ
" Robert L. Kellogg" wrote:
>
> Guys,
>
> I think my NA program has become corrupted. Or, maybe some of you will
> have a suggestion. (unfortunately, if it's corrupted I'm in trouble,
> because I inadvertently copied the bad copy over my original good copy.)
>
> I use it as a single operator with a single radio, so I don't have the
> more complicated network problems. NA worked fine for some time, but
> suddenly it won't send CW and it won't do the band change with Alt-F1 or
> Alt-F2. (neither on the computer screen or on the radio) I don't use
> the software sidetone, listening instead to the radio sidetone, but
> apparently the rig isn't keyed either.
>
> I just put the serial interface kit in my K2, and was hoping to take
> advantage of the serial connection between the rig and the computer.
> Using Hyperterminal, the computer can change bands on the K2, so that
> connection is working. The problem exists whether I use the old cable
> (which worked) or the new one made for the K2. In other words, I don't
> think it's the new serial interface, but I mention this just so you know
> where we're at with this thing.
>
> As a sporadic user, I may have just pushed some software switch through
> error, and that's why I'm writing this note. Hopefully, someone will
> just say, "Oh, you need to check the Fritzamacallit box"
> The program seems to load as normal.
>
> Help or suggestions welcome.
> --
> 73,
> Bob Kellogg, AE4IC
> Prolably, not nececelery. -Benny Hill
>
> _______________________________________________
> NA-User mailing list
> NA-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/na-user
|