[na-user] NA and mfj 1278

[Rich Dailey, KA8OKH" <okh.npi@gte.net (Rich Dailey, KA8OKH)]

>If you can tell me which keys put the 1278 into transmit, and which return
>it to receive, we should be able to make this work.

Hi Dave,

According to the manual,  from command mode, the 1278 requires
a 'K <cr>' from the keyboard to enter converse mode.  From there, a
Ctrl-T initiates transmission mode, and Ctrl-R puts it back in receive
mode.

Of course before all this is done,  the tnc must be set to operate
hf rtty at 45 baud by entering 'mode hb 45 <cr>' while it's still in
command mode.

And when in converse mode, a Ctrl-C gets the tnc back into command mode.

Hope this helps,

Rich, KA8OKH


Rich Dailey, KA8OKH <okh.npi@gte.net>
The KB4NPI/KA8OKH Web <http://home1.gte.net/web22jfw/index.htm>
POW/MIAs - You Are Not Forgotten.


--
Submissions:              na-user@contesting.com
Administrative requests:  na-user-REQUEST@contesting.com
WWW:                      http://datom.contesting.com/
Questions:                owner-na-user@contesting.com