Blair:
We are from Argentina... I have a 90% TC Wireless Network, but in some places
we still use 802.11b with some Senao CB3-Plus in the
Base and in the clients..
If I buy some CB3 hardware here in Argentina, how I can convert this devices at
TC protocoll.??? How I can connect the CBE device to
a TC Base..?
What I must to buy to convert muy CB3's to a TC device..?
Bye and Thanks
Atentamente,
------------------------------------
Roberto Ravetti
Intercom S.R.L
Gerente de Servicios
mailto: rravetti@itc.com.ar
http://www.intercomwireless.com
Te: (54) 3571 427 777
Rio Tercero - Cordoba - Argentina
------------------------------------
----- Original Message -----
From: <blair@wmwisp.net>
To: <karlnet@WISPNotes.com>
Sent: Thursday, February 17, 2005 6:56 PM
Subject: [Karlnet] TurboCell CB3
> There is no ethernet loadable BIN file for the CB3. The TurboCell CB3 is
> only available from us at this time.
>
> Sorry, it is a 5 user bridge much like the KN-50. However, it is setup
> from Config EV like the KN-105/205 or the AP-1000 type of hardware.
>
> If you deny inter-client traffic then why would you need routing at the
> client end? My own network is routed at the tower and backbone level, but
> clients use external netgear type routers just for isolation of virus type
> traffic.
>
> Blair
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|