I apologize for not sending this to the list yesterday. The email server
decided to stop functioning, and I was informed this morning that
http://www.terabeam.com is down and our web admin has not updated
http://www.karlnet.com/. We are in the process to correct the issues.
Please read the release information below:
1) Updated Hermes II driver (supporting mPCI and PCMCIA radios)
2) Configuration security (KBsec)
3) Ethernet stability and burst management improvements
4) Improved DHCP server compatibility when NAT enabled
5) Reduced system latency in dual radio configurations where first interface
is configured as TurboCell satellite.
6) Retransmit counter boundary check added to address "IP Freeze" issue.
Note :Some networks may still experience this issue. Transmit bit rate
should be adjusted at CPE Station(s) and Base, to ensure that frame
retransmit rate is less than 10% to minimize occurrences.
7) TCP stack fixes (WARP/PAR)
8) Repaired Software Key issue that caused units loaded with Hermes I
encryption-enabled builds to lock.
9) Repaired issue that caused default IP address (198.17.74.245) to be sent
to Radius server.
Known Issue:
1) AP-1000 units with boot version 3.20 should not be upgraded to versions
higher than 4.44-02.
This is for our general product release, please check website soon for
additional announcements.
Thanks
Reg Mallory
----- Original Message -----
From: "cj" <cj@cpvegas.com>
To: <karlnet@WISPNotes.com>
Sent: Monday, December 06, 2004 4:14 PM
Subject: [Karlnet] 4.46 released
> I saw the 4.46 kernel was relased recently when i logged into my
license-it account. how is it working for people especially with the ip
freeze issue? any reactions?
>
> thanks
> cj
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|