Send Karlnet mailing list submissions to
karlnet@WISPNotes.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.wispnotes.com/mailman/listinfo/karlnet
or, via email, send a message with subject or body 'help' to
karlnet-request@WISPNotes.com
You can reach the person managing the list at
karlnet-owner@WISPNotes.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Karlnet digest..."
Today's Topics:
1. Flash ROM? (Joe Correia)
2. Re: Flash ROM? (Chris Conn)
----------------------------------------------------------------------
Message: 1
Date: Fri, 28 May 2004 11:38:25 -0400
From: Joe Correia <Joe@FallRiverOnline.com>
Subject: [Karlnet] Flash ROM?
To: karlnet@WISPNotes.com
Message-ID: <40B75CF1.7070209@FallRiverOnline.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi all,
I was wondering if someone could help me out here?
We're running the indoor mount WaveWireless ISP base with Karlnet v3.71
and need to upgrade it to support karlnet's newest software v4.45.
I have tried to upgrade to v4.02, v4.3, & v4.45 and the base locks up
every time on reboot.
Is this a flash rom problem?
The unit goes through the boot then locks up on port2 which is the
wireless interface.
I have swapped out the lucent card & upgraded/downgraded the cards
firmware and it still doesn't work.
So we're stuck running v3.71.
Any ideas?
------------------------------
Message: 2
Date: Thu, 03 Jun 2004 11:41:44 -0400
From: Chris Conn <cconn@abacom.com>
Subject: Re: [Karlnet] Flash ROM?
To: Karlnet Mailing List <karlnet@WISPNotes.com>
Message-ID: <40BF46B8.1080408@abacom.com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Joe Correia wrote:
Hi all,
I was wondering if someone could help me out here?
We're running the indoor mount WaveWireless ISP base with Karlnet v3.71
and need to upgrade it to support karlnet's newest software v4.45.
I have tried to upgrade to v4.02, v4.3, & v4.45 and the base locks up
every time on reboot.
Is this a flash rom problem?
The unit goes through the boot then locks up on port2 which is the
wireless interface.
I have swapped out the lucent card & upgraded/downgraded the cards
firmware and it still doesn't work.
So we're stuck running v3.71.
Any ideas?
Hello,
Just out of curiosity, have you purchased a license from Karlnet to upgrade?
Chris
------------------------------
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
End of Karlnet Digest, Vol 18, Issue 4
**************************************