So.. will there be a future release that will support mixed radio(chipset)
mode, as they have in the past?
Am I to understand that uploading the wrong bin/radio firmware will render the
unit inaccessible? Or will the interface with the non-supported radio just be
disabled?
Thanks,
Andy Henckel
Posting this message to the list as I have found it quite helpful.
-----Original Message-----
From: Support [mailto:Support@karlnet.com]
Sent: Monday, May 17, 2004 11:31 AM
To: Andy Henckel
Subject: RE: Configuration Software Inquiry
Andy, mixed radio mode(chipset) is not supported by our bin files.The naming
convetion should be on the Knowledge base today:
We are in the process of posting Bin file naming conventions:
http://www.karlnet.com/Support/SupportKnowledgeBase.htm
RLM
-----Original Message-----
From: Andy Henckel [mailto:ahenckel@transaria.com]
Sent: Monday, May 17, 2004 1:15 PM
To: Support; KarlNet Configurator
Cc: Brian Flikkema
Subject: RE: Configuration Software Inquiry
Ok... thanks for the swift reply.
Although I am still confused about the location of proper Bin files on the
License-it site. I only see the one version of 4.45 posted everywhere. No
indication that there are more than one filename. Or more than one radio.
What do I do if I have a device that hasa Prism2.5 radio in one interface, and
an Orinoco Card in the other?
Am I just out of luck?
-----Original Message-----
From: Support [mailto:Support@karlnet.com]
Sent: Monday, May 17, 2004 11:11 AM
To: Andy Henckel; KarlNet Configurator
Cc: Brian Flikkema; support@karlnet.com
Subject: RE: Configuration Software Inquiry
Andy, the Pinfill utility should be standard in current releases:
http://www.karlnet.com/Documents/ReleaseNotes/KarlBridgeConfiguratorReleaseN
otes.htm
We are in the process of posting Bin file naming conventions:
http://www.karlnet.com/Support/SupportKnowledgeBase.htm
Search for v4.45 bin files.
The bin files are available on www.License-it.com, if you do not have a log on,
please email support@karlnet.com with radio and hardware specific information.
Thanks
RLM
-----Original Message-----
From: Andy Henckel [mailto:ahenckel@transaria.com]
Sent: Monday, May 17, 2004 11:52 AM
To: KarlNet Configurator
Cc: Brian Flikkema; support@karlnet.com
Subject: RE: Configuration Software Inquiry
Hello again!
I would again like to request the Engineering Version of the Configurator V.5.
Especially I would like to be able to use Ping Fill test as I have been
accustomed to using it.
I am also interested in VLAN support.
I am also wondering, if I can get the individual builds for specific radio's
relative to 4.45.
Thanks,
Andy
Andy Henckel
415 N. Higgins Ave. Suite 26
Missoula, MT 59801
Voice 406.556.1736
Office 406.721.9353
Cell 406.580.9383
.com
-----Original Message-----
From: KarlNet Configurator [mailto:config@karlnet.com]
Sent: Friday, January 30, 2004 4:38 PM
To: Andy Henckel
Subject: RE: Configuration Software Inquiry
<< File: KarlNetConfiguratorv4.44-01-120115 Engineering Version.zip >>
-----Original Message-----
From: Andy Henckel [mailto:andy@multibandcom.com]
Sent: Friday, January 30, 2004 4:26 PM
To: Config Account
Subject: RE: Configuration Software Inquiry
Name (first and last) : Andrew Henckel
Company name (Optional) : Multiband Communications
Address : 415 N Higgins Ave. STE 26
City : Missoula
State (Province) : MT
Postal Code (ZIP) : 59801
Country : USA
Your E-Mail : andy@multiband.cc
Your Web-URL : rockymountaindsl.net
Your Telephone Number : 406.580.9383
Detailed reason for needing the configuration program:
Desire to do Ping fill test. Was informed that I would need engineering
configurator to do so by Reg via the karlnet@wispnotes.com mailing list.
Thanks,
Andy
-----Original Message-----
From: Config Account [mailto:config@karlnet.com]
Sent: Friday, January 30, 2004 2:18 PM
To: Andy Henckel
Subject: Configuration Software Inquiry
Thank you for your inquiry about becoming a tester for
our configuration software.
Before we can send you the engineering version of the software for testing
purposes, we ask that you to send in the following registration form completely
filled out with CORRECT information.
Please note that the software is copyrighted and is for your
personal use only and not for distribution.
You may not sell, distribute, give away or store the software
in a medium such as a website, ftp site, or other electronic or
other medium such that the software can be retrieved by others without prior
written permission of KarlNet, Inc.
Failure to comply with the rules will cause you to be banned
from further updates.
Please also note that this software is given to you "as is".
No warranties of any kind is implied. Use it at your own risk!
We are not responsible in any way for any damamage by the use or inability to
use this software.
(Please also request/see our Copyright Statement).
To keep the integrity and the spirit of this program, please
use the software for your own personal use and testing,
and direct others who are interested in testing the software
to our website so they can request it for themselves.
Please send your test results and bug reports to
configfeedback@karlnet.com
After you fill out the information please email it to config@karlnet.com and
indicate that you will comply with the program guidelines and agree to be a
tester.
Thank you.
Name (first and last) :
Company name (Optional) :
Address :
City :
State (Province) :
Postal Code (ZIP) :
Country :
Your E-Mail :
Your Web-URL :
Your Telephone Number :
Detailed reason for needing the configuration program:
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|