Alex,
I think that you aren't supposed to be able to use v4.43 with the
KN-50's...the AP locks up. This is per the information shipped with a bare
KN-50 card.
Norm
----- Original Message -----
From: "Alex Phillips" <alexp@rbns.net>
To: <karlnet@WISPNotes.com>
Sent: Tuesday, April 20, 2004 12:46 PM
Subject: [Karlnet] Assistance
> Hello group,
>
> I have been using KN for a while now but am new to this list.
>
> I have a Kn205 in a metal box running as a back haul and AP using prism
> 100 and 200mw cards. When I upgraded to 444-02 my system would lock up
> and require a force reload. I have down graded to 443 and now it just
> locks up and requires a power cycle. This is very unusual for me coming
> from using the ap1000's which until recently never had any issues.
>
> I only have 2 remotes off this link both of them are kn50's and it seems
> that this one customer, who has a 10-15% retrans rate, is killing the
> system.
>
> Does anyone have any ideas? I am waiting for KN to come out with the
> Prism f/w for the kn50's to see if that helps. Also, I can't load
> 444-02 for the risk of it locking up and requiring a force reload.
>
> Thanks for your help.
>
> Alex Phillips
> Rural Broadband Network Services LLC
> www.RBNS.net
> www.HighSpeedLink.net
> 540-246-2788
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|