Thanks for the info... it's not the answer I wanted, but at least it's an
answer.
Anyone from Karlnet want address why the Prisms are still not supported in
the 802.11b SEC AP firmware?
----- Original Message -----
From: "Michael Ma Cytech" <mma@cytech.com.cn>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Tuesday, January 06, 2004 5:21 AM
Subject: Re: [Karlnet] PRISM cards in SEC AP+
> I have just worked on this issue based on RG1100 platform today.
> Prism card can only work in Turbocell and SEC client but cannot work in
SEC AP.
>
> CYTECH SYSTEMS LTD.
> ----- Original Message -----
> From: "Larry Yunker (Cyber Broadcasting)" <leyunker@cbcast.com>
> To: <karlnet@WISPNotes.com>
> Sent: Tuesday, January 06, 2004 7:18 PM
> Subject: [Karlnet] PRISM cards in SEC AP+
>
>
> > I know that the PRISM cards are supported in SEC Clients on RG1000's
> > and
> > PRISM cards are supported on several of Turbocell hardware platforms
> >
> > What I would like to know is this... are the PRISM cards supported on
the
> > SEC AP+ on ANY HARDWARE PLATFORM?
> >
> > I'd like to set up a SEC AP with a 200mw prism card and I don't know if
> > that's supported or not. The last time I checked, there was some sort
of
> > bug that was keeping the PRISM card from working in 802.11b mode... it
would
> > only work in TurboCell. Is that still the case?
> >
> > Thanks,
> > Larry
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
----------------------------------------------------------------------------
----
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|