Follow the instructions in the readme.txt file for installing the TC
NDIS driver, that should correct the problem...
Guillermo
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Michael McDermott
Sent: Martes, 11 de Noviembre de 2003 08:18 p.m.
To: Karlnet Mailing List
Subject: [Karlnet] NDIS and RG-1100's with 200mw Senao Cards
I'm aware that the SC-4700 client driver (NDIS) has been discontinued
and
has been replaced by KarlNet's Residential Subscriber Unit (RSU). It is
a
pity because the NDIS did allow easy laptop access to a Karlnet Base
station when conducting site surveys.
I have a client that has just purchased an Alvarion BreezeNET PC-DS.11b
(a
re-badged Orinoco Gold card?) and a SC-4700. The client tried to install
the NDIS on a XP Home machine but when he clicks on Add/Edit
Configuration
Profile in the TurboCell Client, the following error appears:
"Error opening the control panel applet: WNLUC48.CPL - 8002".
I have tried re-installing and playing around with the Wireless Zero
Configuration Service, with no avail.
I don't think it is an incompatibility of the Alvarion card as I have
successfully installed the NDIS client with the card on an XP Pro
machine.
Any suggestions or knowledge that could shed some light on the topic?
Also I have another client that are having problems with 200mw Senao
cards
in RG-1100 devices. The RG-1100 device will not totally boot up with the
200mw card (freezes half way thru the boot up process), but will boot up
and work with other cards (Orinoco cards). Any ideas?
Regards,
Michael R McDermott BEng (Comp. Eng.), MACS, IEEE
Pre-Sales Technical Consultant
Veritech Australia Pty Ltd
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|