I have an AP100 with 2 200mw engenius card it one side link satellite and
the other a base. It has been up with only twice lock up from over a year.
I have found on other ap1000's that I need to use the 200 mw card on the
slot #1 and the lucent card on the second that it works just fine.
Randy Byrd
-----Original Message-----
From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
On Behalf Of Blair Drew Davis
Sent: Tuesday, March 16, 2004 9:35 PM
To: karlnet@WISPNotes.com
Subject: [work] [Karlnet] 200mW radio cards and AP-1000
I have seen some comments on the list about 200mW radio cards being
used in Lucent type AP-1000 hardware.
I had been informed that there were several problems with this,
including power supply problems in the AP-1000 style hardware and Card
Buss ver. PCMCIA interfaces.
Can anyone provide a list of the 200mW cards that are known to work in
AP-1000 Lucent hardware?
Thanks
--
Blair Davis
Computer Adjusters of Allegan
AOL Instant Message Screen Name theory240
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|