Example /etc/pcmcia/config.opts file copied from a working system:
#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
# System resources available for PCMCIA devices
include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
# Resources we should not use, even if they appear to be available
exclude irq 4
exclude irq 7
#----------------------------------------------------------------------
module "wavelan2_cs" opts "port_type=3 license=license_here protocol=1
channelautoselect=0 channel=1 nwid=1 pp=pass_phrase station_name='Client Name'"
*********** REPLY SEPARATOR ***********
On 2004-Feb-29 at 10:59 AM Support wrote:
>Are you trying to connect the Linux machine wirelessly to a TurboCell ISP
>base station?.If not what mode is the interface in that the Linux machine
>is
>wirelessly linked(freq,Net ID,?Have you checked the TurboCell Pass Phrase?.
>
>RLM
>----- Original Message -----
>From: "sparc vs. x86" <sparcvsx86@hotmail.com>
>To: <Karlnet@WISPNotes.com>
>Sent: Sunday, February 29, 2004 9:51 AM
>Subject: [Karlnet] linux orc problem
>
>
>> I am trying to get Linux work with ORiNOCO pcmcia card in turbocell mode.
>Everything seems to be ok with drivers, and I can ping configured IP for
>the
>device. But any attempt to ping anything on the turbocell network results
>with "Destination host unreachable"! I checked parameters meny times and
>they are ok, i think. The line in /etc/pcmcia/config.opts is like that:
>>
>> module "wavelan2_cs" opts "protocol=1 port_type=3 nwid=5 channel=5
>license=THEPURCHESEDLICENSE pp=PAS-PHRASE key_1=the:key:12345
>transmit_key_id=1 enable_encryption=Y"
>>
>> when I restart the pcmcia the link led goes on and there is no Oops
>warning!
>>
>> I do ifconfig eth0 correctly and ifconfig shows correct MAC addr and ip
>settings, routes are correct too.
>>
>> Any idea what could make me troubles configuring it? I think that the
>configuration is incorrect somehow because I triead ot on 3 different
>machines and two cards with correct licenses. Even led lights on the card
>are showing no errors!
>>
>> _______________________________________________
>> Karlnet mailing list
>> Karlnet@WISPNotes.com
>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|