Yes, we have a COR and I checked the values of channel, nwid, pasphrase, WEP
key and IP settings. Still cant ping any address and I can get no traffic on
the PCcard. Although, the cards link-led and traffic-led are showing the
connectivity and traffic with these values! If I try to change the pp or
key_1 values the link led is on but the traffic led shows no traffic!
BTW. The software versions i am using are:
RedHat 7.1
kernel 2.4.9 and 2.4.2
pcmcia-cs 3.1.30, 3.2.3, 3.2.7 (but just to compile the wavelan2_cs module,
other drivers like pcmcia_core or yenta_socket are kernel compiled modules)
wavelan2_cs-TC1[1].04
gcc 2.96
----- Original Message -----
From: "Support" <support@karlnet.com>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Sunday, February 29, 2004 4:59 PM
Subject: Re: [Karlnet] linux orc problem
> Are you trying to connect the Linux machine wirelessly to a TurboCell ISP
> base station?.If not what mode is the interface in that the Linux machine
is
> wirelessly linked(freq,Net ID,?Have you checked the TurboCell Pass
Phrase?.
>
> RLM
> ----- Original Message -----
> From: "sparc vs. x86" <sparcvsx86@hotmail.com>
> To: <Karlnet@WISPNotes.com>
> Sent: Sunday, February 29, 2004 9:51 AM
> Subject: [Karlnet] linux orc problem
>
>
> > I am trying to get Linux work with ORiNOCO pcmcia card in turbocell
mode.
> Everything seems to be ok with drivers, and I can ping configured IP for
the
> device. But any attempt to ping anything on the turbocell network results
> with "Destination host unreachable"! I checked parameters meny times and
> they are ok, i think. The line in /etc/pcmcia/config.opts is like that:
> >
> > module "wavelan2_cs" opts "protocol=1 port_type=3 nwid=5 channel=5
> license=THEPURCHESEDLICENSE pp=PAS-PHRASE key_1=the:key:12345
> transmit_key_id=1 enable_encryption=Y"
> >
> > when I restart the pcmcia the link led goes on and there is no Oops
> warning!
> >
> > I do ifconfig eth0 correctly and ifconfig shows correct MAC addr and ip
> settings, routes are correct too.
> >
> > Any idea what could make me troubles configuring it? I think that the
> configuration is incorrect somehow because I triead ot on 3 different
> machines and two cards with correct licenses. Even led lights on the card
> are showing no errors!
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|