Give it an address out of the dhcp list in the novel server. If all the
clients are getting dhcp from the novell server I would simply set the
novell server to give out the gateway of the karlnet device. You could plug
it directly plug it into the novell server and have the server do nat but i
wouldnt. Good luck
Scott
----- Original Message -----
From: <jna@tcpbbs.net>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Friday, January 23, 2004 7:59 PM
Subject: [Karlnet] Novell & Karlnet
> Hello,
>
> I just did a new install today and came upon a stumbling block. They have
a
> small network setup internally with a novel netware 6 server. Problem I
need
> to overcome is how to get the computers they want on the Internet to
> co-exists with there novell server and our radio gateway? The novell
server
> is setup as 192.168.1.1 and is dishing out dhcp to all client computers.
So
> how do we get the computers to access the radio for the internet then?
> Normaly we would have the radio natting the connection with one public ip
> and dishing out dhcp assigning private such as 192.168.1.1 as the radio
and
> use that as the gateway. If we just gave the radio an ip out of the range
> the novell server is handing out, say 192.168.1.200 and assign the client
> computer the gateway of 192.168.1.200? We connected them with a RG1000
> running 5 user soho. Or is there a better way?
>
> Thanks,
> John
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|