On Tue, 2003-12-30 at 05:32, Peter Dordik wrote:
> I noticed packet loss even with ping from ethernet side to Ethernet convertor.
>
> EC is very weak device. What amount of traffic you have? Have You any troubles
> with windows NDIS driver connected to this same AP too?
-I am only actually trying to pass about 400k of throughput, although
all my bandwidth shaping is done centrally.
I will check the log, but this unit has been hard rebooted once or twice
already, which wipes the log. I never have been a huge fan of these,
especially due to the "mods" you have to do just to get a pigtail to sit
on them correctly. (Trust me, I no longer even consider using
non-integrated CPE equipment,... shudder).. but they exist in the net
none the less and I still honor their maintenence, no matter how
annoying. Anyone wanna buy a whole bunch of Lucent gen 1 ECs? email me
offline. They make great, um, doorstops.
> > I have seen every now and then that a couple of my Lucent ECs do strange
> > things. A prime example is a shot I have that is from the AP side of a
> > AP-1000 w/ Karlnet Software to a Lucent Ec with an Orinoco Gold Card.
> > It switches signal levels and drops packets every nth packet, and is
> > causing me some heartache. Although the SNR never drops below 18,
> > whenever it changes, (from say, 30) there is packet loss.
>
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|