I'd like to see this fixed also, if possible.
----- Original Message -----
From: "Timothy Steele" <tsteele@e-isco.com>
To: <karlnet@WISPNotes.com>
Sent: Tuesday, August 12, 2003 8:02 AM
Subject: [Karlnet] Unbicom units lack of SNR testing?
> We started working with the low cost CPE's provided by Charles (Hawking
> Tech conversions). These units contain Prizm based radio cards. As you
> know Prizm has a "lack of proper support" with the KarlNet code to
> properly report SNR. This poses a problem for most WISP's that encourage
> "Do it yourself" installs or work with an outside installer. The KarlNet
> base Bin code does not allow signal testing without a SNMP password.
> Either we reveal our naked base units to our installers or involve staff
> from the WISP at each and every installation. Does anyone out there know
> (KarlNet included ;-) Is the lack of SNR support the reason why the web
> interface exhibits the same "1db" signal bug that most Prizm based
> cards? In other words is the improper SNR a result of the same bug
> exhibited in the WG+ boards, Flashrom, or any KarlNet based Bin, or is
> it a lack of firmware storage to hold the code for signal testing? Will
> this be fixed in future revisions?
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|