Generally speaking, ALL Kernels are released at the same time. There have
been very few exceptions to this.
Kevin
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
Sent: Tuesday, July 15, 2003 9:17 AM
To: Karlnet Mailing List
Subject: Re: [Karlnet] Flashrom Question
My reasoning for going Flashrom is that I am competing heavily with Cable
Modems and so I need to deliver as much speed as possible. Throttling will
be turned off completely and handled at the NOC.
I plan to have upwards of 50 users per base (combination of residential and
corporate) and two or three of those will likely be micro-pops with upwards
of 10 users on them...so, I think I need to squeeze out every bit of
performance I possibly can.
Is the flashrom kernel as actively developed as the AP1000/WPBASE+ kernel?
Eg, do new releases like 4.43k come out as fast for flashrom as for the
other platforms?
----- Original Message -----
From: "Kevin Knuth" <kknuth@karlnet.com>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Tuesday, July 15, 2003 9:10 AM
Subject: RE: [Karlnet] Flashrom Question
> Andy,
>
> Impossible to answer. What kind of traffic, corporate or residential
> clients, are you throttling bandwidth, etc.
>
> Too many variables for us to test.
>
> Kevin
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Andy Henckel
> Sent: Tuesday, July 15, 2003 8:54 AM
> To: Karlnet Mailing List
> Subject: RE: [Karlnet] Flashrom Question
>
>
> Based on processor speed alone, What is the recommended number of users to
> have per WPBASE board without seeing a significant performance decrease
for
> each user?
>
> -----Original Message-----
> From: Kevin Knuth [mailto:kknuth@karlnet.com]
> Sent: Tuesday, July 15, 2003 7:54 AM
> To: Brett Hays; Karlnet Mailing List
> Subject: RE: [Karlnet] Flashrom Question
>
>
> Oh,
>
> and I should have told you all this: The extra processing power is needed
> to help with the Superpacket aggregation- packing and unpacking that data,
> on top of polling, takes processing power. This is only on the BASE side,
> the WPRG+ boards are fine for clients, as they do not control the polling,
> and all they have to do is the Superpacket aggregation.
>
> Kevin
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
> Sent: Tuesday, July 15, 2003 8:43 AM
> To: Karlnet Mailing List
> Subject: Re: [Karlnet] Flashrom Question
>
>
> Well, this brings about my next question for the list. Is there a list of
> motherboards people have had good results with and can vouch for
> compatibility?
>
> I don't ever see using Flashrom for client sites, but at a tower where I
> plan to serve customers and micropops from and want all the performance I
> can get, it seems interesting.
>
> I have a source for off-lease systems where I can buy HP Vectra
PIII933/128
> Ram or Compaq PIII 866/128 Ram for $250. Would that seem like a good
> platform for FlashRom?
>
> ----- Original Message -----
> From: "Kevin Knuth" <kknuth@karlnet.com>
> To: "Brett Hays" <bretth@htonline.net>; "Karlnet Mailing List"
> <karlnet@WISPNotes.com>
> Sent: Tuesday, July 15, 2003 8:34 AM
> Subject: RE: [Karlnet] Flashrom Question
>
>
> > The WPBASE+ board is the same as the WPRG+ board with an additional
> Ethernet
> > and Radio slot. You do not gain processing power.
> >
> > Another issue (for me) is that I think the flashroms are bit cumbersome.
> > You need a good place to mount a computer, instead of a little box for a
> > WPRG+ board.
> >
> > Frankly, my suggestion is to always start with the WPRG+ board- it meets
> > most peoples needs just fine. If you have performance issues, you may
> want
> > to consider moving up to a Flashrom.
> >
> > Kevin
> >
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
> > Sent: Tuesday, July 15, 2003 8:30 AM
> > To: Karlnet Mailing List
> > Subject: Re: [Karlnet] Flashrom Question
> >
> >
> > Yes, but what about the WPBASE+ board?
> >
> >
> >
> > ----- Original Message -----
> > From: "Kevin Knuth" <kknuth@karlnet.com>
> > To: "Brett Hays" <bretth@htonline.net>; "Karlnet Mailing List"
> > <karlnet@WISPNotes.com>
> > Sent: Tuesday, July 15, 2003 8:10 AM
> > Subject: RE: [Karlnet] Flashrom Question
> >
> >
> > > Hmmmm,
> > >
> > > I hesitate to give the "OFFICIAL" Karlnet response! ;)
> > >
> > > My response is two parts:
> > > 1. Without question a Flashrom with a suitable motherboard (say 233Mhz
> or
> > > faster) is better than our WPRG+ Board.
> > > 2. MY OPINION ONLY- Flashroms are sometimes a support nightmare, as
> every
> > > motherboard has little quirks that make it act a little differently.
So
> > for
> > > stability sake, I like the WPRG+ boards. BUT- if you get a
motherboard
> > that
> > > you can work the bugs out of, it will out perform the WPRG+ board.
> > >
> > > Kevin
> > >
> > > -----Original Message-----
> > > From: karlnet-bounces@WISPNotes.com
> > > [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
> > > Sent: Monday, July 14, 2003 11:15 PM
> > > To: Karlnet Mailing List
> > > Subject: [Karlnet] Flashrom Question
> > >
> > >
> > > I am trying to settle on using the new WPBase boards for Flashrom for
a
> > new
> > > tower. My experience so far has been AP1000's only. I think the
> AP1000's
> > > are 66Mhz and the WPBase is 133MHz.
> > >
> > > I guess I am just wondering since Karlnet designed their own hardware
at
> > > 133Mhz and the limit is 64 clients on any hardware, is there any real
> > > performance/throughput gain to be had from going the Flashrom route?
If
> > so,
> > > what is the limit in terms of processor speed, etc. where the law of
> > > diminishing returns kicks in.
> > >
> > > What is the official line on this from Karlnet? Since the new Karlnet
> > > boards are so recently designed, do they represent the peak performing
> > > platform for an ISP Base Station or is too much never enough?
> > >
> > > Brett Hays
> > > Hometown Online
> > > www.htonline.net
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|