----- Original Message -----
Sent: Wednesday, December 11, 2002 9:13
AM
Subject: [Karlnet] Problem COR
--help!
I have a COR running v4.15 with one interface set
as a sattelite for backhaul and the other as ISPbase w/ protocol
filtering. The device is powered across about 150' of cat5.
The device is rebooting all the time. I
think it may be a power issue but the device is getting about 4.79v...even
under HEAVY load. There are 9 clients on this AP now and the problems
really started after I added that last client. I am working to get a
different DC injector to get the power up but it really seems like there is
something else going on. The device will reboot under the
following conditions:
1) if I send it a ping flood
2) if I ping 3 or more clients and open up most
any of the monitoring screens on the config app. (link test, remote
monitor, etc.)
I did just turn up another tower about 5 miles
away and this site can "hear" the other tower just a bit. The problem
seemed to get exponentially worse once the new tower came up. However,
it was also about the same time that we added the additional client.
The FW on both radios is 8.x as I believe they
are loaded with this FW when the COR boots.
There are not to many people doing stuff on the
network this morning but I just change freq's at the new tower (so this site
can't hear it anymore) and things seem to be working fine now.
Anybody have any ideas?