Helio,
This is interesting. What version of code are you running on this AP?
We load firmware to the radio when the AP boots to turbocell (v7.52
specifically). We load v8.10 in 802.11b mode.
Was this problem from the start, or has unit been functioning normally then
quit?
Bryan McGeary
Karlnet Inc.
bmcgeary@karlnet.com
----- Original Message -----
From: <helio@compuland.com.br>
To: <karlnet@WISPNotes.com>
Sent: Friday, November 22, 2002 2:31 PM
Subject: [Karlnet] AP1000 loosing one card
> Hi:
>
> I have an issue with an AP1000 running Karlnet TurboCell ISP. The slot
one
> is used as a satellite to link to another AP. The slot two is used
> as a ISP polling base. Sometimes the slot one just hangs (the card
> just seems to turn off) - a reboot in the bridge solves. The link
> has good SNR (about 30db). The AP is brand new.
>
> Could be a problem with the bridge ? Or with the card ? Firmware issue ?
>
> Thanks,
> Helio.
> -
> CompuLand ISP Admin
> GnuPG Public Key: http://www.compuland.com.br/helio/gpgpublic.txt
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|