Ok good to know, if I remember the amp is good with 30mW to 100mW and
with the cable loss this should be in the range.
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Open Chat Server http://www.demarctech.com:8000
Yahoo IM: tonymorella
Wireless Solution Provider
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com] On Behalf Of Bill Fisher
> Sent: Thursday, November 07, 2002 9:35 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] OT - sorta - Link Help
>
>
>
> > Also need to be careful about amping the 180mW cards you
> might be over
> > driving the AMP which would put it in to compression and do
> all kinds
> > of creasy things! If possible you might try and by pass the
> amp just
> > to experiment.
>
> Yep, I tried a Lucent card thinking the same thing. But I've
> got another link that is driving the same brand/model amp
> with a 180mw card on an even shorter link and it works great.
> So I don't think that is the problem unless the amp is bad.
>
> Thanks
>
> Bill
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
|