sometimes you need to set yourself manually to 10BaseT to get this solved -
I think Nate had the same problem w/ an AP-1000 the other day
-Charles
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of John Maxwell
Sent: Sunday, October 13, 2002 10:52 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Wierd Reload
I've done many reloads on RG-1100s and they always act correctly...except
this one. I complete the upload as normal but after the reboot, the RG
won't answer to the configev software anymore. I have the machine and ap on
the same subnet. It usually loads up as 198.17.74.254, but the lights are
on and nobody's home. I see traffic on the ETH port...but no answer. Once
in a while it will show up on a "scan" but never answers to a connect.
It works great as an RG in stock mode and passes traffic normally!
Has anyone ever seen this?
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|