Jim, you can't use 802.11b compatibility mode on the PRISM radios in the
AP-1000 either. I had the same mix of radios, however, running fine under
TC on the AP-1000. I'd give the mixed TC/.11b a try and see what happens.
It certainly works using just Lucent radios.
Norm
----- Original Message -----
From: "Nate McLain" <nate@ctrail.net>
To: <karlnet@WISPNotes.com>
Sent: Tuesday, July 09, 2002 9:02 PM
Subject: RE: [Karlnet] Another Prism 2.5 200mW Question/ Problem?
> I know you can't use the 200mW radios in 802.11b compatiblity mode on a
> flashrom unit...
> Been there done that.....
> But I haven't tested it on an AP-1000.
>
> Nate
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Jim
> Sent: Tuesday, July 09, 2002 8:15 PM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] Another Prism 2.5 200mW Question/ Problem?
>
>
> Can I use a 200mW card in one slot of an AP-1000 with TC and use a Silver
> card in the other slot in 802.11b mode?
>
> Has anyone experienced problems with this combo?
>
> Jim
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
|