Would be interested in this data, what the performance increase is.
Please keep us updated.
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Jim
Sent: Thursday, July 04, 2002 12:01 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] IP Routing - Urgent
Tony,
Loss of transfer BW from the second hop out.
Jim
----- Original Message -----
From: "Tony " <tonylist@wwwbiz.com>
To: <karlnet@WISPNotes.com>
Sent: Thursday, July 04, 2002 11:57 AM
Subject: RE: [Karlnet] IP Routing - Urgent
> Jim
>
> Version 4.02 does support classless routing. From a logistics stand
> point I would recommend starting at the CPEs first and work you way
> back making sure you have a default gateway for the CPE to talk to.
> This gateway, once CPE are changed will then be assigned to the base
> station. Also you should test this on a system you have access to
> first, once its working the just copy this config to the customers
> CPEs.
>
> While I fully agree with the change (I always recommend routing at the
> CPE) why the change?
>
> Sincerely
> Tony Morella
> Demarc Technology Group
> Office: 908-996-7995
> Cell: 908-246-9170
> Fax: 908-847-0202
> email: tony@demarctech.com
> http://www.demarctech.com
> Wireless Solution Provider
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> On Behalf Of Jim
> Sent: Thursday, July 04, 2002 11:28 AM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] IP Routing - Urgent
>
>
> Urgent, because I would like to do this on the Holiday, while no one
> is using the system :)
>
> I want to set up routing rather than bridging.
>
> Does Karlnet IP Router allow subnets of varying length within 1 Class
> C or does it expect all Subnets within the Class C to be the same
> length?
>
> Can I use a /26 and then several /30 subnets within 1 Class C or must
> I use all /26 or all /30 subnets?
>
> Next question. Must I start configuring at the furthest hop out and
> work back to the base to be able to maintain connectivity of the
> remotes?
>
> Jim
>
> -----------------------------------------------
> ----------Join the wisp-list Discussion Group----------
> Join: wisp-list-request@wisp-list.com with the word 'join' in the
> body.
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|