Karlnet
[Top] [All Lists]

RE: [Karlnet] RG-1000 CPE with Karlnet - Symmetry question

To: "'karlnet@WISPNotes.com'" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] RG-1000 CPE with Karlnet - Symmetry question
From: Dan Metcalf <danm@suncorstainless.com>
Reply-to: karlnet@WISPNotes.com
Date: Tue, 21 May 2002 11:32:53 -0400
List-post: <mailto:karlnet@WISPNotes.com>
Peter,

I have done various tests with the rg1000's in point to point and point to
multipoint, you have a total amount of bandwidth available of about 5.5Mb/s.
Since the radio is half-duplex you can't get 5.5Mb's in both directions

Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com

-----Original Message-----
From: Peter K. Butler [mailto:peter@whizwireless.com]
Sent: Tuesday, May 21, 2002 10:49 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] RG-1000 CPE with Karlnet - Symmetry question

When two Karlnet SR-4250 (or a 4200 in one and a 4250 in another) are
programmed into the RG-1000 for use as a point to point link, shouldn't this
result in a symmetrical operation. i.e., same upload and download speeds
within reason?

Has anyone tried a bench test? Something like a laptop attached to each
RG-1000 and doing a file transfer? We have seen 4-4.5 mbps FTP transfer
rates, which is what we would expect in a lab environment. Using FTP, we
would expect some non-symmetry, but if the download-upload speed differs by
more than 2:1, we would believe there are issues with the radio/software.

We realize that the real world of networks being attached  including radio
characteristics on the path will affect symmetry. That is why we have been
doing bench tests to keep the radios off other networks.

Peter Butler
Whizwireless LLC


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>