CW STATUS is always on my CTWIN screen.
Try the following if you haven't done so already:
Change the speed and see if the STATUS comes back,
Change to keyboard mode abd see if the STATUS comes back.
If those fail, start CT with the -r argument. It will reset all the windows to
default positions, putting the STATUS back on screen if it got moved off.
Cheers,
Dan
Dan Zeitlin - K2YWE
South Shore ARC - K3AU
Annapolis, Maryland
http://danzee.org
--- On Sun, 11/14/10, k4pi <k4pi@bellsouth.net> wrote:
> From: k4pi <k4pi@bellsouth.net>
> Subject: [ct-user] CW STATUS
> To: ct-user@contesting.com
> Date: Sunday, November 14, 2010, 9:41 AM
> I am using CTWIN and for the last few
> years I cannot get the CW Status to
> come up on the screen. Manual says Alt-R will get the
> Rate and CW Status on
> top. I have looked behind all the windows on the
> screen. Is there a new
> command for this? 73 Mike K4PI
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web: http://www.k1ea.com/
>
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|