Hi Bob - Thanks for the help - but its fighting me.
Let me try to show you exactly what I am doing and maybe you will see
something I am doing wrong.
W98SE - go to DOS prompt
get to C:\CT>
type in CT and <enter>
get C:\CT>\CT
CT Version 10.03.002 by K1EA
Enter File Name:
I enter ARDXTEST -KA (ARDXTEST is just a file I am playing with ) and a
space between the filename and -KA
The program starts .
I type in NOWORKDUPE <enter>
then enter a known dupe -
ALT F7 sends QSO B4
INSERT sends the dupe call and QSO B4
This is all OK if running BUT
my understanding is the -KA switch should NOT send my call when I am doing
S&P and I have entered a dupe call and press my call F4 ,and that would be
nice . I do notice the -KA switch is not in his list updated 19 Apr 2007 .
I was not sure the switch is working however - so I tried entering
ARDXTEST -NOW which should go directly to the logging screen but it does not
, it stops at the info screen just as if you had started it normally.
So somehow either I am not doing something right or the -KA switch is gone
???
Can you tell from what I have shown ?
Incidentally if I try to do like you said and type -KA ARDXTEST it opens a
new program with -KA as -KA.bin . My Grandson (typical 21 year old computer
jock) tells me I always have to do DOS switches after the filename as does
the old CT manual I got when I bought CT years ago.
Thanks - Hank K7HP
----- Original Message -----
From: "Bob Wilson, N6TV" <n6tv@arrl.net>
To: "pfizenmayer" <pfizenmayer@qwest.net>; "CT Reflector"
<ct-user@contesting.com>
Sent: Thursday, February 14, 2008 12:37 AM
Subject: Re: [ct-user] trunc bi.exe and QSO B4
> On Wed, Feb 13, 2008 at 7:20 PM, pfizenmayer <pfizenmayer@qwest.net>
> wrote:
>
>> Does anyone know if this utility "trunc bi.exe" can be used to remove
>> contacts from CT10.03.002 DOS versions ?
>
>
> For CT version 10 use *trunc_bin.exe* rather than trunc_bi.exe. You can
> find it in the *ct_tools.zip* file which you can download from the CT 10
> Support files page <http://www.k1ea.com/ct10/index.htm>.
>
> Also I was playing with ARRL DX CW and don't seem to be able to get CT to
>> send a QSO B4 message with a dupe entered or get the beep with a dupe.
>> Space bar brings up the dupe line under the fields OK.
>
>
> Type NOWORKDUPE [Enter] if you don't want to work dupes. Press [Shift-F9]
> to program the QSO B4 message that will be sent to dupes when you press
> [Insert]
>
>
>> And my old manual says when I enter a dupe in S&P and press F4 to send my
>> call - it should inhibit sending my call - but does not do so.
>
>
> According to Release10.txt <http://www.k1ea.com/download/release10.txt>:
>
> 10.00.004 - 30 Jan 2004
>
> * New command line switch for K5KA (-KA)
> When this switch is turned on the F4 will not send your call if the call
> in
> the callsign field is a dupe. Instead a dupe message comes up.
>
> So you have to do
>
> CT -KA filename
>
> or
> CTWin -KA filename
>
> to enable this feature it seems.
>
> 73,
> Bob, N6TV
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web: http://www.k1ea.com/
>
>
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|