During our recent CQWW CW opeation, I did note that the TS-930/Piexx
setting seems broken. I've found that the TS-850 setting seems to work
fine. Give that a try.
The COMTSR switches for the COM port COM[n] you connect to the radio
should be COMTSR[n] -b4800 -n82
Dave, W6NL/HC8L
Jim Dicso wrote:
> Date: Sat, 2 Dec 2006 10:58:28 -0500
> From: "Jim Dicso" <dicso123@hotmail.com>
> Subject: [ct-user] CT remote control of TS930S w/PIEXX upgrade
> To: <ct-user@contesting.com>
> Message-ID: <BAY111-DAV7A76AEF2D072A2D2763738DD90@phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> CT locks up (cannot change bands or enter QSOs, among other problems) when
> connected to a TS930S upgraded with PIEXX digital board. I tried with CT
> (v9 & v10) and CTWIN on two different PCs.
>
> PIEXX (Chris Seig) helped verify that the interface is working using
> Hyperterminal (which confirmed the correct port settings).
> In addition, RCP570 (radio control program for TS570) running on a laptop
> works very well with the TS930/PIEXX.
>
> I would appreciate help with the setup of either CT or CTWIN or both to
> allow communication and CW keying (CT only) through the serial port. The PC
> runs Win98 (2 serial ports) and laptop runs WIN XP (1 serial port)
>
> Thanks,
>
> Jim K2SZ
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|